Skullcandy Ink’d Headphones Review

My iPod stock headphones (the newer sleek version) sound pretty good. However, on a recent airplane trip it was obvious that I needed a better solution that cranking my iPod to max volume to hear the movie I was watching.

Most of the time I tend to listen to music at very reasonable volume levels, loud enough to block the background hum in the office – but not so loud I won’t hear the phone or someone talking to me. Once you’ve sunk enough cash into really nice sound equipment (home theater), you start to think seriously about protecting your ability to enjoy it over the long term.  Thus, earplugs are my friend at rock concerts, club events (the few I still go to) and hockey games.  In my youth I did enough damage to my hearing that I’d rather avoid losing it entirely later on in life.

Initially I was looking for active noise cancelling headsets, but their relative cost and the mixed results people have had resulted in my looking at some of the in ear canal headphones that provided passive noise reduction (they are effectively ear plugs with speakers).  Several of my friends have the Bose system and swear by it, so I suspect if you can talk yourself into the cost and the ‘big can’ style is ok then it is a good solution.

After digging around the web, I came across the Skullcandy Ink’d ear buds.  These seem to fit my requirements of in ear headphones, with some amount of noise blocking – but the real thing that sealed the deal was the cost: $13 (The Source was having a 1/2 price scale).  It turns out BestBuy also carries these and they are often on sale for $15.

One negative is that the earphones are not marked left and right.  I read somewhere, and it seems to be true from my listening, that if you look at where the earphone wires join up, there is a small plastic block with skullcandy written on it.  The words on the plastic block are on the front, so if you follow the wires up – you can figure out left and right.  Some users have sorted out left and right, then marked one with a dab of nail polish – I may do the same at one point, but these will mostly get used on airplanes where fidelity is already somewhat compromised.

Compared the to stock earphones, I noticed immediately that I could hear a background hiss when I plugged them into my iPod.  Checking with some other headphones I have, I believe that this background hiss is actually being masked by the stock headphones.  This is actually annoying enough that I would not want to use these at the office or any relatively quiet listening environment.

On the positive side, these are great on an airplane.  They work almost as well as earplugs, but let me listen to music at a much more reasonable volume level (still louder than I would in a quiet environment).  You know you’re still on a plane, but even with the music off – they provide a reasonable amount of sound reduction.  The bass is actually pretty good as well – much better than the stock ear buds.

Some reviews of the Ink’d complained about fit, and squeeky noises from the plastic inserts.  I haven’t really experienced any problems with them at all.  However, at one point I may try the hack of using a leather punch to modify a foam earplug to fit these as a potential upgrade.

Overall, I’d have to consider myself very pleased with the purchase.  For a very modest price, I got myself what I consider a great set of headphones for airplane travel.

Playlists

It seems some people are really into creating playlists.  I’m not one of them.  While I have a lot of nasty things to say about iTunes, the smart playlists feature has been the only way I’ve bothered to make playlists.  At least until now.

The other day I was thinking that while its nice to have iTunes recommend songs that you might want to buy that are similar to what you’re browsing in your music collection, and Amazon has lots of recommendations on what you might buy based on your previous purchases.  No one seemed to be harnessing the relationship between things that I already own.

Well, it turns out there is a bunch of stuff out there that does exactly that.

At first I ended up at wikipedia on music recommendation systems.  Further digging turned up something called The Filter which was blogged by Wired a while back, unfortunately it doesn’t seem quite ready for prime-time so I keep hunting around.   Then I came across MusicIP mixer, and a related comparison review article on lastfm.

MusicIP seemed like the best, most available candidate, so I gave it a shot.  The free version is limited, but not crippled.  It installs as a stand alone application, but is aware of iTunes and will read settings from there to figure out where (and what) your music collection is.  Out of the box, all you do is pick a song (or a few) and ask to make a mix.

I picked a random Haujobb track and asked for a mix of 75 songs (the limit for the free version).  The sample_mix was a fairly good selection of the music in my collection that I’d consider to be fairly compatible.  There were a few odd songs in the list that I trimmed out by indicating “less of this” and it shuffled things around (and I suspect remembered the error for later).

I then burned a MP3 CD for the car with these 75 songs (some 500MB).  As an aside, I’m terrible for updating my driving tunes, so what I had in the car was pretty stale.  Well, its been 2 days so far and I’m very pleased with the experience.  This is a much better mix set than the smart playlist I primarily use on my iPod.

One note about the MusicIP system, it needs a lot of processing time until it has consumed your music collection.  I ran my PC for well over 24hrs processing 3500 songs.  This is a one time hit, and I consider it a fair tax for the free version of the software – especially if it gives me an easy way to make new mix CDs, or new playlists for my iPod.

Be it through some social network, algorithm, or mixture of the two – I hope that this type of technology grows in popularity.  As we gather more and more media, we’re going to need better ways to interact with it – and insisting that we manually tag, sift and sort our data simply won’t scale.

Imagine if your email could be grouped and sifted based on how others had handled the same messages?  How about if your PVR could just record the same shows your friends are watching?  If you always answer “yes to all” on that dialog box, why not let me make it a sticky setting?

Slimdevices

A couple of years ago I broke down and bought a Squeezebox. This really gave me the incentive to digitize my entire audio library (I settled on 192kbps fixed MP3 via the LAME encoder).  The thing that makes the Squeezebox so cool, is the server software – which works with other networked MP3 players.  I’m still using the 6.5 version of Slimserver, but will eventually move up to the 7.0 Squeezecenter.

You still need to be a little bit handy in terms of setting up a server, but the slimdevices story really makes it pretty easy to get to where you need to be for a nice integrated story.  The UI on the device itself is relatively people friendly (ie: you don’t have to be a geek to use it), and the web UI that gives you the option to control your player from your PC totally rocks.  The setup is way easier than building a PVR, such as a MythTV box – which I have also done.  The server software is free, and you can try it out using some player simulation software.

The server software supports plugins.  This allows a wide range of customization of the base server software.  I like to have the weather displayed, and had selected the WeatherTime plugin.  This required a free account registration, and the careful avoidance of signing up for spam at weather.com.  Until recently this was working just fine, then I got an email indicating I was not using their service “correctly” and would have my feed terminated.  I quickly realized how much I missed having the weather available.

It turns out that the WeatherTime folk have updated the plugin to pull from the Weather Underground, so I’m back in business.  Simply grabbing the updated plugin (v1.9.5), restarting my slimserver, and configuring the city code (use the airport code) – was all I needed to do.

The squeezebox wasn’t my first networked player, the RIO was my first device.  Certainly something ahead of its time.  It was only recently that I was able to revive my old RIO and put it to use again, the slimrio project allows you to run an alternate firmware on the RIO and connect to the slimserver.  You will need to configure the slimserver to automatically convert the audio to lower bitrate MP3s, this is actually really easy to do – another testament to how cool the slimserver software is.

If I had a better story for syncing data to my iPod, I’d consider storing my entire audio collection in FLAC.  In the near term, I’ll continue to suffer using iTunes.  Hopefully one day soon, the idea that we will see media convergence (and have easily available software to glue it all together reasonably) will be realized.